What is a Pop Rivet and How Does it Work?Ī pop rivet is also known as a blind or hollow rivet and is used where you are only able to work with one side of the rivet.
SOLID RIVET TOOL INSTALL
Solid rivets (also known as round head rivets) – A technique that goes back to the Bronze Age, making this one of the oldest and also one of the most reliable types of fasteners.Self-piercing rivets go through the top sheet of material but do not fully pierce the bottom sheet, creating a water or gas-tight joint. Self-piercing rivets – These rivets do not need a drill or punched hole as the end includes a chamfered poke to pierce materials to be joined.The flare creates a wide surface which reduces the chance of the rivet being pulled out. These splits, which usually come in sets of three cause the shaft to bend and flare outwards as the mandrel is drawn into the rivet. Oscar rivets – Similar to blind rivets, Oscar rivets have splits along the hollow shaft.Friction-lock rivet – Available as countersunk or dome shaped, these early forms of blind rivet where the first to be widely used in aerospace applications these rivets resemble an expanding bolt.Flush rivet – Used for external surfaces to provide a good appearance and eliminate aerodynamic drag, this type of rivet uses countersunk heads and a countersunk hole and are also called countersunk rivets.Drive rivets – This type of blind rivet has a short mandrel which protrudes from the head and is driven in with a hammer causing the end inserted into the hole to flare.This type of riveting is very fast to apply and is used in a variety of sectors including aerospace, shipbuilding and electronics. Blind rivets (also known as hollow or pop rivets) – These are used when it isn't possible to see the other side of a join.There are eight widely used types of rivets, which include: Riveting can create either lap or butt joints with a variety of different rivet configurations, including single, double and zig-zag formations. When finished the tail has the appearance of a dumbbell shape completing the riveted joint. The rivet is deformed by pounding or smashing of the tail, which makes the material flatter and usually causes the tail to be expanded by about one and a half times the size of the stem's original diameter. When installed the rivet is either drilled, placed or punched into a hole, afterwards the tail is then deformed, holding the rivet in place. Click here to see our latest technical engineering podcasts on YouTube. National Structural Integrity Research CentreĪ rivet is a mechanical fastener composed of a head on one end and a cylindrical stem on another (called the tail) which has the appearance of a metal pin.
Structural Integrity Research Foundation.
0 kommentar(er)
